SOLIDS Logo 2020 Dortmund pos e1584027311459

Solids Dortmund is part of the Solids European Series, which are the largest professional trade shows exclusively focussing on the powder and bulk industry.

The fair will take place in October 9th - 10th 2024 in Dortmund.

 

Venue

Messe Dortmund
Rheinlanddamm 200
D-44139 Dortmund

 
Date & opening times

October 09th - 10th 2023
09 AM - 05 PM

Visit the website of the trade fair.

To register free of charge, please click here.

 

We are looking forward to your visit at our stand K40 - 5!

  • Description
  • Technical Data
  • Download

Using state-of-the-art microwave technology the flowmeter DYNA M-flow is designed for flow measurement in metallic pipelines from a few kg/h to many t/h. The system is suitable for on-line measurement of powders, dust, pellets, and granulates.

The measurement principle of the DYNA M-flow is based on the physical Doppler-Effect, whereas the sensor generates a uniform field in the microwave frequency range inside the pipeline. These microwaves are being reflected by particles passing through the pipe. Calculation of frequency and amplitude changes allows an accurate determination of the solid's mass flow rate. Nonmoving particles like dust accumulation are excluded from calculations.

 

Design

 

 

The DYNA M-flow consists of a probe, a DIN-rail transmitter, a welding branch and the PC-software DYNAvisual.

The process interface occurs by a welding branch, through which the sensor is screwed flush with the inside of the pipe. With this a flanging at perpendicular and horizontal pipes for free fall and pneumatic conveying occurs.

The probe is connected by a four core cable to a DIN-rail mounted transmitter with 4...20 mA, pulse output, error relay, RS232 and RS485 output.

For commissioning and calibration a notebook with our DYNAvisual software is needed. Calibration can be performed with either one or more reference points.

The measurement value is output either analogue or as digital signal. A serial COM interface is available at the front of the transmitter to connect a notebook computer and a RS485 interface for connection to a PLC system.

 

 

 


Technical Data Sensor

Material Antenna Stainl. steel 1.4571 (AISI 316 Ti)
  Isolation Polyamide (PA 6.6)
  Process coupling Welding branch, stainl. steel1.4571 (AISI 316Ti)
Ambient cond. Temperature -20 °C ... +70 °C (-4 °F ... +158 °F)
  Degree of protection IP 65 (EN 60529)
  EMC According to EN 61326-1

 

Technical Data Ecaluationg Unit

  Design DIN-rail, 22,5 mm
  Supply voltage 18 ... 31 V DC, 3 W
Ambient cond. Temperature +10 °C ... +60 °C (+14 °F ... +140 °F)
  Degree of protection IP 30 (EN 60529)
Output Analogue 0,4 ... 20 mA (load < 750 Ω)
    0,2 ... 10 V
  Digital Pulse as Open Collector
    Error relais 30 V AC/DC; 0,5 A
  Interfaces RS 232 und RS 485

 

Process Data

Process conditions Temperature Max. +90 °C (+194 °F)
  Pressure Max. 40 bar (570 lbs)
  Partical size 0,01 μm ... 20 mm
  Pipe cross section Max. DN 300
  Mas flow rate Min. 1 kg/h

 

 

 
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg 

Phone +49 40 790 185 0 
Fax +49 40 790185 18 
info@dynainstruments.com

DYNALogoKlein

INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY

FOR MORE THEN 20 YEARS

EX logo gross        IECEx logo gross

  

Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM 
PRIVACY STATEMENT

kisspng bureau veritas iso 14000 iso 14001 iso 9000 iso 90 5b12dd245d88f1.2194740915279629163831       

DYNAInstruments as Text