Solids Dortmund is part of the Solids European Series, which are the largest professional trade shows exclusively focussing on the powder and bulk industry.
The fair will take place in October 9th - 10th 2024 in Dortmund.
Venue
Messe Dortmund
Rheinlanddamm 200
D-44139 Dortmund
Date & opening times
October 09th - 10th 2023
09 AM - 05 PM
Visit the website of the trade fair.
To register free of charge, please click here.
We are looking forward to your visit at our stand K40 - 5!
DYNAchute is a chute weigher that combines proven and highly accurate velocity measurement and weighing technology to determine the mass flow rate of bulk solids.
In the robust system controller these both absolute values (without calibration) will be used to calculate the mass flow rate which will be given in analogue or digital form. An totaliser and a dose function make it possible beside the use of continuous dose measurement (kg/h) and the weighing of charges (kg).
In addition to the high accuracy in the range of per mill DYNAchute is featured by metering not influenced by solids properties and gives free flow through also when its switched off.
| range of measurement | 1 - 50 t/h | |
|---|---|---|
| housing | stainl. steel 1.430 l | |
| degree of protection | IP 66 | |
| pressure | ± 0,1 bar | |
| supply voltage | 18 ... 36 VDC, galvanically isolated 250 V | |
| power consumption | 3,5 Watt | |
| cable glands | M 20 x 1,5 (cable diameter 6 ... 12 mm) | |
| temperature | process | -10 °C ... +40 °C |
| ambient: | 0 °C ... +50 °C | |
| storage | 0 °C ... +60 °C | |
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg
Phone +49 40 790 185 0
Fax +49 40 790185 18
info@dynainstruments.com
INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY
FOR MORE THEN 20 YEARS
Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM
PRIVACY STATEMENT
