POWTECH logo

 

The POWTECH fair trade is the worldwide leading exhibition about mechanic process technology of powder, granules and bulk solids.

The fair will take place from August 30th until September 1st 2022 on the exhibition centre in Nuremberg.

 

Venue

Messezentrum / Exhibiton centre
90471 Nuremberg


Date & opening times

August 30th - September 1st 2022
09 AM - 6 PM (Tuesday and Wednesday)
09 AM - 5 PM (Thursday)

 

Visit the website of the trade fair.

  • Description
  • Technical Data
  • Downloads

The measurement system DYNAguard L is a microwave barrier and consist of a transmitter and a receiver unit. It is used for level monitoring or level detection of bulk material e.g. in silos, pipelines, chutes, containers, feeding- / receiving vessels and hoppers.

Based on the est microwave technology, the transmitter unit lat sends out microwaves which are evaluated by the receiver unit. Bulk material that is conveyed e.g. into a hopper is piling up slowly between transmitter and receiver and attenuates the signal. This initiates a ndividually adjustable switching operation which indicates that a certain level in the hopper is reached. Conversely the system can be used for minimum level detection also when silos are emptied.

The DYNAguard L can also measure through electrical insulators. In case of special process conditions (temperature, pressure, specific products) this allows also to disconnect the system from the vessel to be monitored.

Material of housing Stainless steel
Sensor surface Plastic [optionally ceramic for abrasive substances]
International Protection
Rating
IP65
Weight
Measuring System
1,3 kg
Storage temperature -20 °C bis 60 °C [non-condensing]
Operating temperature -20 °C bis 60 °C [non-condensing]
Process temperature -20 °C bis 85 °C
Process pressure Max. 2 bar [optionally 25 bar with ceramic sensor surface]
Operating voltage 24 VDC [18 VDC … 30 VDC]

Current drain
Transmitter/Receiver

Max. 80 mA
Power < 2 W
Transmit frequency 24,000 Ghz … 24,250 GHz
Transmit power 10 dBm
Measuring range 15 cm up to 25 m
Hysteresis Adjustable
Switching delay Adjustable [50 ms to 50 s]
Relay output SPST or SPDT, floating
Switching voltage 35 VAC bzw. 45 VDC
Switching current Min. 10 µA & max. 1 A
Switching power  35 VA resp. 30 W
Cable gland  M16
Connection Pluggable screw connectors

 
DYNA Instruments GmbH
Tempowerkring 7
D-21079 Hamburg 

Phone +49 40 790 185 0 
Fax +49 40 790185 18 
info@dynainstruments.com

DYNALogoKlein

INNOVATIVE SOLUTIONS
PROVEN TECHNOLOGY

FOR MORE THEN 20 YEARS

EX logo gross        IECEx logo gross

  

Copyright © 2016 DYNA Instruments GmbH
IMPRESSUM 
PRIVACY STATEMENT

kisspng bureau veritas iso 14000 iso 14001 iso 9000 iso 90 5b12dd245d88f1.2194740915279629163831       

DYNAInstruments as Text